Thermal Grease

Home > Products > Packaging Products > Thermal Interface Materials > Thermal Grease G-765

Thermal Grease

PACKAGING PRODUCTS



	Thermal Interface Materials Molding Compounds Encapsulants & Underfills LED Encapsulant Material Interposers Connectors


	G-765 Data Sheet 114KB

GREASE SELECTION CHART

G-765 Thermal Grease

PRODUCT DESCRIPTION
Shrinking die and increasing power demands continue to make the thermal solution a critical part of IC package design. Shin-Etsu MicroSi’s G-765 thermal interface material improves performance by enabling packages to run cooler without sacrificing reliability. The ability of G-765 to dissipate heat enables users to reduce the overall cost of their thermal solution. Shin-Etsu MicroSi’s G-765 is designed to meet current and future thermal management requirements, thus providing drop-in solutions for new IC packages, without the expense of qualifications. This highly thermal conductive grease has been successfully used on CPUs, GPUs, PLCs and other temperature sensitive components.

G-765 Data Sheet

114KB

G-765 PROPERTIES

Viscosity (Pascal Second)	250
Appearance	Gray
Volatile Content	< 1.0%
Specific Gravity	2.8
Thermal Conductivity(W/m °K)	3.0

Thermal Grease G765 is available in:
Syringes Cartridges Bulk Custom Sizes Available	0.35 gm, 1.0 gm 55 gm, 170 gm, 400 gm 2.0 Kg
Storage Conditions	60°F to 85°F (15°C - 29°C)

G-765 APPLICATION

Shin-Etsu MicroSi’s G-765 material is available in several cost effective packages which include syringes, cartridges and bulk containers.

Syringes
Shin-Etsu MicroSi’s syringes are ideal for manual applications. Pre-filled syringes assure that a consistent shot weight is applied to the intended surface. Shin-Etsu MicroSi’s SQC processes provide a consistent dispense weight with each syringe. The Syringe Delivery Method provides the most flexibility for an organization, with the ability to utilize the same product package for production and field requirements without additional investment in application tools.

Cartridges
For medium to large production applications, Shin-Etsu MicroSi can provide G-765 in cartridges. The cartridge delivery system can be utilized with either manual, automated or silk-screening equipment. The cartridge delivery system allows dispensing of the material, while protecting the integrity and exposure level of the unused portion.

Bulk Containers
Bulk delivery provides the lowest possible unit cost. Bulk purchases are available for large scale production facilities where material is consumed at a rapid rate.

G-765 PERFORMANCE

A key factor in selecting a thermal interface material is the relationship between bond line thickness (BLT) and thermal resistance. The chart on the left illustrates very low thermal resistance at different bond line thicknesses.

The Viscosity of G-765 allows for consistent dispense patterns when utilizing stencil printing or automated dispense machines. This advantage allows for tighter control in the use of and dispensing of the thermal interface material.